Mopping

1. Open the top cover of the station to take out the clean water tank, open the water tank inlet and add clean water to the water tank up to the MAX line.
2. Flip the robot upside down, place it bottom up, and install the mopping pad plates and mopping pads.
3. Place the robot directly in front of the station, press and hold the start button to make the robot return to the station to charge. Once docked it will start charging.
4. Press the start/pause button on the station or start/pause on the robot to start the cleaning task.

Tips:
(1) Do not add laundry detergent and other cleaning solutions other than Ecovacs cleaning solution into the clean water tank.
(2) Do not pause or stop the robot while it’s cleaning and drying the mopping pads.